pccardctl – PCMCIA card control utility
pccardctl [-V] command [socket]
pccardctl is used to monitor and control the state of PCMCIA sockets. If a socket number is specified, the command will be applied to just one socket; otherwise, all sockets will be affected.
If pccardctl is executed by root, all commands are available. If it is executed by an unpriviledged user, only the informational commands are accessible.
|Display the current socket status flags. –not yet implemented|
|Display the socket configuration, including power settings, interrupt and I/O window settings, and configuration registers. –not yet implemented|
|Display card identification information, including product identification strings, manufacturer ID codes, and function ID codes. Not yet implemented for cardbus cards. Use lspci instead.|
|info||Much like the ident command, but its output is formatted as a series of Bourne-stype shell variable definitions for use in scripts. Not yet implemented for cardbus cards.|
|Shut down and then disable power for a socket.|
|Restore power to a socket, and re-configure for use.|
|Notify all client drivers that this card will be ejected, then cut power to the socket.|
|Notify all client drivers that this card has just been inserted.|