How do I mount a slaved hard drive?

    1. Check to see how many drives are installed: You can do this using the fdisk command.

      [root@default]# fdisk -l | grep ‘^Disk

      You should see output similar to the following:

      Disk /dev/sda: 251.0 GB, 251000193024 bytes
      Disk /dev/sdb: 251.0 GB, 251000193024 bytes

 

  • Mount the new disk using the mount command:

    First, you’ll need to create a mount point. We’ll use /disk1. This is where we’ll mount /dev/sdb1. Enter the following commands:

    [root@default]# mkdir /disk1
    [root@default]# mount /dev/sdb1 /disk1
    [root@default]# df -H
  • Edit /etc/fstab so the new drive will automatically mount to /disk1 on reboot